Muros Pré-Fabricados 910 541 877

Prices

How much it costs to wall a plot

A plot of 10 × 20 m has a perimeter of 60 metres. Walled on all four sides with a 2 m concrete wall, it comes to 7,563 – 8,763 € excluding VAT; leaving out the street frontage, where the gate goes, it is 50 m and 6,308 – 7,308 €. What determines the price is the perimeter, not the area: two plots with the same square metres can require very different metres of wall if one is long and narrow.

This page starts from the plot because that is how the question comes in: almost nobody knows how many metres of wall they need, but everybody knows the dimensions of their plot. The figures include material and installation with foundation, excluding VAT, and are the same as on the page price per metre.

These figures are an estimate, not a quote. They are there to give a reliable order of magnitude before you speak to anyone. The final price is always discussed and agreed with one of our managers: it depends on the line of the wall on the plot, on access for the vehicle, on the slope, on the finish chosen and on delivery to site. No figure on this page constitutes a commercial offer.

Price based on your plot measurements

A 2 m high wall, in stock grey. The three-sided column assumes that the short frontage faces the street and takes a gate instead of a continuous wall — this is the most common case on an urban plot.

PlotAreaPerimeterWall on all 4 sidesWall on 3 sides
10 × 20 m200 m²60 m7 563 – 8 763 €6 308 – 7 308 €
50 m
10 × 25 m250 m²70 m8 818 – 10 218 €7 563 – 8 763 €
60 m
10 × 30 m300 m²80 m10 073 – 11 673 €8 818 – 10 218 €
70 m
8 × 20 m160 m²56 m7 061 – 8 181 €6 057 – 7 017 €
48 m
12 × 30 m360 m²84 m10 575 – 12 255 €9 069 – 10 509 €
72 m
15 × 30 m450 m²90 m11 328 – 13 128 €9 462 – 10 962 €
75 m
20 × 30 m600 m²100 m12 583 – 14 583 €10 073 – 11 673 €
80 m
20 × 50 m1000 m²140 m17 603 – 20 403 €15 093 – 17 493 €
120 m

Delivery is not included in these prices. Delivery of the material to the site is quoted separately, by municipality and volume.

Perimeter = 2 × (width + length). If the neighbour already has a wall on one of the sides, take that side out of the calculation: their wall already closes that boundary.

Perimeter matrix — all sides walled

Plot width in the left-hand column, length in the top row. Each cell gives the metres of wall to be built and the value of material plus installation for a height of 2 m, excluding VAT. Find your two measurements and read the cell where they meet.

Width \ Length20 m25 m30 m35 m40 m50 m60 m80 m100 m
8 m56 m
7 061 – 8 181 €
66 m
8 316 – 9 636 €
76 m
9 571 – 11 091 €
86 m
10 826 – 12 546 €
96 m
12 081 – 14 001 €
116 m
14 591 – 16 911 €
136 m
17 101 – 19 821 €
176 m
22 121 – 25 641 €
216 m
27 141 – 31 461 €
10 m60 m
7 563 – 8 763 €
70 m
8 818 – 10 218 €
80 m
10 073 – 11 673 €
90 m
11 328 – 13 128 €
100 m
12 583 – 14 583 €
120 m
15 093 – 17 493 €
140 m
17 603 – 20 403 €
180 m
22 623 – 26 223 €
220 m
27 643 – 32 043 €
12 m64 m
8 065 – 9 345 €
74 m
9 320 – 10 800 €
84 m
10 575 – 12 255 €
94 m
11 830 – 13 710 €
104 m
13 085 – 15 165 €
124 m
15 595 – 18 075 €
144 m
18 105 – 20 985 €
184 m
23 125 – 26 805 €
224 m
28 145 – 32 625 €
15 m70 m
8 818 – 10 218 €
80 m
10 073 – 11 673 €
90 m
11 328 – 13 128 €
100 m
12 583 – 14 583 €
110 m
13 838 – 16 038 €
130 m
16 348 – 18 948 €
150 m
18 858 – 21 858 €
190 m
23 878 – 27 678 €
230 m
28 898 – 33 498 €
20 m80 m
10 073 – 11 673 €
90 m
11 328 – 13 128 €
100 m
12 583 – 14 583 €
110 m
13 838 – 16 038 €
120 m
15 093 – 17 493 €
140 m
17 603 – 20 403 €
160 m
20 113 – 23 313 €
200 m
25 133 – 29 133 €
240 m
30 153 – 34 953 €
25 m90 m
11 328 – 13 128 €
100 m
12 583 – 14 583 €
110 m
13 838 – 16 038 €
120 m
15 093 – 17 493 €
130 m
16 348 – 18 948 €
150 m
18 858 – 21 858 €
170 m
21 368 – 24 768 €
210 m
26 388 – 30 588 €
250 m
31 408 – 36 408 €
30 m100 m
12 583 – 14 583 €
110 m
13 838 – 16 038 €
120 m
15 093 – 17 493 €
130 m
16 348 – 18 948 €
140 m
17 603 – 20 403 €
160 m
20 113 – 23 313 €
180 m
22 623 – 26 223 €
220 m
27 643 – 32 043 €
260 m
32 663 – 37 863 €
40 m120 m
15 093 – 17 493 €
130 m
16 348 – 18 948 €
140 m
17 603 – 20 403 €
150 m
18 858 – 21 858 €
160 m
20 113 – 23 313 €
180 m
22 623 – 26 223 €
200 m
25 133 – 29 133 €
240 m
30 153 – 34 953 €
280 m
35 173 – 40 773 €
50 m140 m
17 603 – 20 403 €
150 m
18 858 – 21 858 €
160 m
20 113 – 23 313 €
170 m
21 368 – 24 768 €
180 m
22 623 – 26 223 €
200 m
25 133 – 29 133 €
220 m
27 643 – 32 043 €
260 m
32 663 – 37 863 €
300 m
37 683 – 43 683 €

Delivery is not included in these prices. Delivery of the material to the site is quoted separately, by municipality and volume.

Perimeter = 2 × (width + length). The plot area does not come into it: two plots with the same square metres need different metres of wall if one is square and the other long and narrow. A 1000 m² plot at 20 × 50 m takes 140 m of wall; the same plot at 31.6 × 31.6 m takes 126 m. That is 14 metres of difference from the shape alone.

Free quote, with no obligation. Tell us the municipality, the length and the height — we reply with a figure.

Request a free quote or we call you:

The same plot at four heights

Plot of 10 × 20 m. The installation does not change with the height; the material does.

Height4 sides (60 m)3 sides (50 m)
1.5 m6 813 – 8 013 €5 683 – 6 683 €
1.8 m7 443 – 8 643 €6 208 – 7 208 €
2.0 m7 563 – 8 763 €6 308 – 7 308 €
2.5 m8 685 – 9 885 €7 245 – 8 245 €

Delivery is not included in these prices. Delivery of the material to the site is quoted separately, by municipality and volume.

Calculation methodology

The calculation is open and can be redone by hand with a calculator. There are six steps, always the same, and every unit value is the manufacturer's list price or a fixed fee of ours.

1. Metres of wallPlot perimeter = 2 × (width + length). If the street frontage takes a gate instead of a wall, that width is subtracted. Boundaries already closed by a neighbour's wall are not included.
2. Panel areaArea = metres of wall × height, in m². A panel measures 2000 × 500 mm, that is, exactly one square metre, so the area of the wall is directly the panel area. We do not round up: on the last segment the panel is cut and the actual area is invoiced.
3. Number of postsPosts = metres of wall ÷ 2, rounded up, + 1. Each segment between posts measures 2 m; the first segment needs two posts and each subsequent segment adds one. A 20 m wall takes 11 posts, a 60 m wall takes 31.
4. Material costMaterial = area × panel price per m² + number of posts × post price per unit. The panel is sold by the m², the post individually. At a height of 1.80 m there are two courses with different prices: 1.50 m of 500 mm panel plus 0.30 m of 300 mm panel.
5. Installation costInstallation = metres of wall × 59…79 € per linear metre. It is a separate figure, it is not included in the material, and does not rise with height — rises with the difficulty of the plot. Includes drilling the holes and the foundation of each post with the concrete it requires.
6. TotalTotal = material + installation. Add 23 % VAT and delivery of the material to the site, quoted by municipality.

Delivery is not included in these prices. Delivery of the material to the site is quoted separately, by municipality and volume.

Area = metres of wall × height

Posts = round up (metres of wall ÷ 2) + 1

Material = area × panel price/m² + posts × post price/unit

Installation = metres of wall × 59…79 €/linear metre

Total = material + installation  (+ 23 % VAT)

Unit values used

Panel 2000 × 500 mm, grey25 €/m²
Panel 2000 × 300 mm, grey35 €/m²
Panel 2000 × 500 mm, white33 €/m²
Post 2200 and 2800 mm, grey33 €/un
Post 3300 mm, grey (2.5 m height)45 €/un
Installation with foundation59–79 €/linear metre
VAT23 %

Delivery is not included in these prices. Delivery of the material to the site is quoted separately, by municipality and volume.

Composition of each height

1.50 m3 layers of 500 mm · 2200 mm post
1.80 m3 layers of 500 mm + 1 of 300 mm · 2800 mm post
2.00 m4 layers of 500 mm · 2800 mm post
2.50 m5 layers of 500 mm · 3300 mm post

Calculate for your plot

Enter the two dimensions of the plot and how many sides you want to wall. The calculator works out the perimeter and then the same six steps of the methodology above.

Delivery is not included in these prices. Delivery of the material to the site is quoted separately, by municipality and volume.

The perimeter comes from the two plot dimensions. Boundaries where the neighbour already has a wall should not be counted — in that case select fewer sides.

The result is an estimate, not a quote. The final price is discussed and agreed with one of our managers, after we have seen the line of the wall, the access to the plot and the slope.

Get the exact quoteWe confirm the measurements and settle the price with you.

Free quote, with no obligation. Tell us the municipality, the length and the height — we reply with a figure.

Request a free quote or we call you:

How to measure your plot in five minutes

1. Take the measurements from the caderneta predialThe area is there. If the plot is regular, the area divided by the frontage gives you the depth.
2. Pace out the street frontageAn adult stride is around 75 cm. It serves to confirm the order of magnitude, not for the final quote.
3. Count only the boundaries still to be closedBoundaries where the neighbour already has a wall are not included. It is the most common saving and the most often forgotten.
4. Decide the frontageIf the entrance takes a gate, the front wall shortens to the two corner posts. Take the width of the gate off the perimeter.
5. Check the slopeA sloping plot means the wall is stepped, and each step is one more post. Check the page for your municipality.

Questions

I have a 500 m² plot. How many metres of wall do I need?

Between 89 and 103 metres to close all four sides, depending on the shape of the plot: 89 m if it is square, 103 m if it is a narrow 1:3 strip. With the gate at the front, deduct the width of the entrance.

Is it cheaper to wall a square plot?

Yes, and the difference is real. For the same area, a square is the shape with the least perimeter. Between a square 1000 m² plot and the same plot in a 1:3 strip there is a difference of about 20 metres of wall.

Do I need to wall all four sides?

Rarely. Boundaries where the neighbour already has a wall are closed off, and the street frontage usually takes a gate. In practice most of the quotes we prepare close two or three sides.

Does the price per metre change if the plot is large?

Almost nothing. Between 20 and 100 metres of wall the difference is less than two euros per metre, because the number of posts grows at the same rate as the length.

Do these figures include the gate?

No. The gate and the automation are quoted separately, and so is delivery of the material to the site.

Wall quote by plot shape

A wall quote based on the shape of the plot starts before the price: first you fix the perimeter and which boundaries are to be closed, and only then do you talk about euros. Without that, two quotes for the same plot are not comparable.

When you ask for a quote — from us or from another company — insist on these ten itemised lines. It is the quickest way to see whether two quotes are comparable.

1. LengthLinear metres of wall, and which boundaries are included.
2. HeightAbove ground level, and how many panel layers make it up.
3. Panel thicknessIn our system, 30 mm.
4. FinishTexture and colour, and whether it is in stock or made to order.
5. PostsHow many, at what height and at what unit price.
6. FoundationHole size, depth and whether it is included.
7. InstallationPer linear metre, and what the rate covers.
8. TransportDelivery of the material to the site, priced separately.
9. VATRate applied and whether the figures are including or excluding VAT.
10. Lead timeDays on site at a rate of 20–30 m/day, and the start date.

Estimate, not a quote. The final figure is fixed with one of our managers after we have seen the site.

Request my exact quote With the ten lines above itemised, with no obligation.

Tell us the plot measurements

With the width, the length, the intended height and the municipality we give you the final figure, delivery included.